MV Agusta F3 675/800 Fender Eliminator Kit Instructions
MV Agusta F3 675/800 Fender Eliminator Kit Installation Instructions
1) Remove stock license plate / turn signal holder by removing 4 bolts (photo 1).
2) Cut stock plugs off license plate holder and solder onto our fender eliminator (photo 2).
• Red/white plug: Right turn signal (Blue wire > Black Wire: Black wire > Red Wire)
• Blue/white plug: Left turn signal (Red wire > Black wire: Black wire > Red wire)
• White Plug: License plate light (Yellow wire > Red Wire: Black wire > Black wire)
3) Remove 2 plastic side pods (photo 3).
4) Slide provided bolts up through the turn signal plate and through frame holes (photo 4).
5) Use provided hardware (washer / nut), but keep unit loose (photo 5).
6) Clean the surface area well with denatured alcohol or something comparable to prepare for double sided tape. Remove the tape backing (photo 6).
Slide turn signal bracket up into place and tighten 2 bolts (photo 7).
8) Plug 3 factory connectors back together.
9) Reinstall side pods and seat (photo 8).
Shop The Part
New Rage Cycles
MV Agusta F3 675/800 Fender Eliminator Kit (2013 - Present)
If you are looking for a sleek looking fender eliminator for your F3, we've got just what you need! Our PLUG & PLAY fender eliminator kit is as clean of a kit as you will find. Our turn signal lenses are built into our billet powder coated plate, and comes with a white LED license plate light and plate bracket to keep you compliant with all states and countries.
Save time on the install and more time riding with our line of plug & play accessories.
Our polycarbonate lenses and aluminum plates are CNC machined giving you a very clean and sleek replacement.
(2013 - Present)